Price History Charts of Baracuda G3 Pool Cleaner Best Price in 2022

Automatically controls excess flow through cleaner for optimal performance and longevity. Energy efficient

Quick and easy installation

Compatible with Zodiac MX series pool cleaners

Automatically adjusts the flow for Zodiac Baracuda MX Cleaners. Sets the perfect pressure for your Baracuda cleaners to ensure that it doesn't over work the gears and reduces wear and tear.

To be used in inground pools only

36 Finned Disc

Works with the Baracuda G3 Suction Side Pool Cleaner

Used on the Zodiac Baracuda G2, G3, G4 and Alpha Models and Polaris 140 and 150

Replaces part number W49655

10 hoses included for up to 30' pool. Ideal for cleaning bottom surface and wall; does not clean stairs

Require at least a 1 hp swimming pool pump or 1600 GHP to function properly.

No tools required and no electricity needed; Attaches to your existing filtration system

Cleaner should be moving about the pool at a rate of 8 to 12 feet per minute

Automatic operation by self-navigating around the water on set patterns for the top to bottom pool cleaning. Refer to the PDF attached below in Technical Specification for the Manual and Troubleshooting Guide

【Efficient Cleaning】With the powerful dual-drive motors(50 watts), Seagull 1000 above ground pool cleaner effortlessly traverse the pool bottom, and can climb an incline up to 15 degrees. The cordless pool vacuum pulls in kinds of foreign matter from dirt, debris to insects, and small stones, leaves up to 5.5” wide. The unit also has an independent brush, ensuring a meticulous cleaning of your pool.

【Fast Moving and Long Runtime】With a 52.5ft / 16 mtrs a minute movement speed, our cordless pool cleaner quickly cleans the entire floor of pools. Perfect for above ground pools up to 35ft diameter and in-ground pools with the flat floors up to 17*50 feet. The large capacity 5000mAh rechargeable battery lasts up to 90 minutes providing non-stop cleaning after 4-6 hours of charging.

【Cordless and Hassle-free】No need to connect a power cable or to deal with messy pool hoses and their attachments. This robotic pool cleaner is completely cordless and does not require the use of your pool filter to operate. This AIPER pool cleaner for above ground pool will take care of everything, and is a revolution in pool cleaning.

【Low Battery Detection and Self-parking Technology】With inbuilt self-parking technology, Seagull 1000 pool vacuum for above ground pool will park near the pool wall when the battery is low or after completing a cleaning cycle for easy retrieval. Easily remove the pool cleaner from the pool with the included floating rope. No need to get into the water, or to get wet unnecessarily.

As the pioneer in cordless robotic pool vacuums, Aiper adheres to using our expertise to provide pool owners with a hassle-free, smart and simple pool cleaning solution. Comes with a 1-year warranty and worry-free customer service. Let your robot do the dirty work, get your weekends back!

✅【High Quality Pool Vacuum Cleaner Parts Kit】ALBLA High Quality New Pool Cleaner Parts Kit Replacement For Zodiac Barracuda G2, G3, G4, Alpha 2, 3 Included W70329 Pool Cleaner Finned Seal,2x W69698 Pool cleaner diaphragm with 2x W81600 Retaining Ring, and W70327 Foot Pad . also fits for Zodiac Barracuda Pacer, Ranger 1500 models, Manta pool cleaner. The pool cleaner kits are made of wear-resistant, soft, and high-quality materials, very durable, easy to install and very suitable.

✅【W70329 Pool Cleaner Finned Seal Replaces Numbers】: W83277 W70464 W70329 W46666; Fits for Zodiac Barracuda G2 G3 G4 pool cleaners; Also fits W47521 (Alpha 3, Alpha 3 Plus), W49655 (Alpha 2, Manta), W49610, W70032 (Pacer).

✅【W69698 Diaphragm Replaces Numbers】: W69698 W81701 W81700 with Retaining Ring W81600, fits for Zodiac Barracuda G3 G4 Alpha 2 3.

✅【W70327 Foot Pad Replaces Numbers】: W70327, W83275, W72880, W69039, W72865 W72855, W69721. Works with Barracuda G2, G3, G4, Alpha 2, Alpha 3, Pacer & Ranger 1500.

✅【【Package Included】: 1 x W70329 Finned seal , 2 x W69698 Diaphragm , 2 x W81600 Retaining Ring , 1x W70327 foot pad. And with 18-month warranty, for any reason you're not completely satisfied, you can ask for a replacement or full refund.

100% Brand-New

Replace Zodiac Baracuda G3 and G4 pool cleaner Diaphragm W69698

It also fits Baracuda Zoom, Ranger, Wahoo pool cleaner diaphragm

Comes with retaining ring

ANTOBLE brand-new finned disc seal will be shipped 𝗙𝗟𝗔𝗧 in the package. It will lay flat like your original finned skirt.

The finned seal disc replacement part fits perfectly for Zodiac Baracuda G2 G3 G4 pool cleaners.

Replaces Parts # W70464 (G2), W70329 (Newer G3), W46666 (Older G3), W83277 (G4).

Easy to install and works great on plaster, tile, marcite, pebble, vinyl and fiberglass pools.

This pool cleaner replacement part is actually thicker than the original. Don't be fooled by other thinner, poor quality parts.

➤【HIGH-QUALITY & DURABLE】: The W69698 is sturdy, flexible, , and long service life (the expected service life is twice that of ordinary diaphragms). Swimming Pool Cleaning Diaphragm W69698 is a heavy-duty diaphragm made of silicone resin. It is high-quality, strong, flexible and durable. It can be used for a long time. The expected use time is twice that of ordinary diaphragms and it is easy to install, which can save money and time

➤【SOLVE THE POOL PROBLEM】: Any tearing or tearing of the diaphragm will cause the cleaner to start, stop or stop moving completely, and then the diaphragm should be replaced with a new one to solve this problem. The W69698 then regulate the water flow and allow the cleaner to run normally, thereby keeping the pool clean and enabling the cleaner to function properly

➤【EASY INSTALLATION】: No tools are needed, just eject the old one and replace the new swimming pool diaphragm snap in place in just 30 seconds; there is no difficulty, it has been strictly tested by the manufacturer, and the effect meets or exceeds OEM specifications

➤【W69698 SPECIFICATION】: Pack of 4 Yellow W69698 long life diaphragms and 4 Retaining Rings W81600, suitable for Zodiac Baracuda G3, G4 and Alpha 2, 3 swimming pool cleaners; also suitable for Baracuda Zoom, Ranger, Wahoo swimming pool cleaners

➤【AFTER-SALES SERVICE】: Funmit commit to provide customer with quality product and excellent service as well as reasonable price, you can feel confident to select our product without any doubts

Package includes: 1 x W70329 pool cleaner finned seal, 2 x W69698 pool cleaner diaphragm (with 2 pieces retaining ring W81600), 1 x W70327 pool cleaner foot pad; totally 4 pieces,easy to install ,save your time and money

Replace parts No.:W70329 pool cleaner finned seal replaces:W70327, W83275 W72880, W69039, W72865 W72855, W69721;W70327 Foot Pad:replace part No. W70327, W83275, W72855, W69721

Application: compatible with Zodiac Baracuda G2, G3, Alpha2, Alpha 3 Pool Cleaner, also compatible with Zodiac Baracuda Pacer, Ranger 1500 models, Manta pool cleaner

Material: these replacement kit is made of durable and wear resistant materials, each has been well inspected and test by manufacturer, which can be applied for a long time

Please note: these replacement kit is not original parts, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility

Fits Zodiac Baracuda G3 and G4 pool cleaners.

It also fits Barracuda, Zoom, Ranger, Wahoo pool cleaners.

High-quality, robust, flexible and durable long-life foot pad

Includes 1-piece foot pad

If for any reason you are not satisfied with your purchase, please contact us directly for a replacement or refund. 100% satisfaction guaranteed!